VL-SWD275AZ - Panasonic - Video Intercom DECT KIT

Panasonic SKU: VL-SWD275AZ

Item is available to order. Please note the estimated delivery times below (If not displayed please contact us). Please call to pre-arrange any pick-ups.

Please Note: Estimated delivery details below

Includes:

  • Large 7" LCD DECT Monitor (800x480p) & VL-524L Outdoor Station
  • 2.2" DECT Wireless handset
  • Highly Expandable
  • Up to 3 Additional Monitors
  • Up to 6 Additional Wireless Handsets
  • Up to 2 Door Station (Support Electronic lock)
  • Safety & Security
  • Up to 50 Picture recording (x8 shots per person)
  • Night Vision & Voice change function on door station
  • Simple 2-Wire Installation
  • AC-DC Power Supply included (VL-PS241)
Model composition Main Monitor(VL-MWD275) x1, Door Station(VL-V524L) x1, Wireless monitor(VL-WD619) x 1, Power Supply Unit (VL-PS241) x1
Maximum Connectable Units Door Station Up to 2 (1 included with VL-SWD275)
Monitor Up to 3 extension monitors (not including the main monitor)
Wireless Monitor Up to 6 (1 included with VL-SWD275)
*A total of up to 6 Wireless sub monitors and Extension monitors can be registered.
Wireless Repeater Up to 2 (sold separately)
Connectable Devices E-lock Release Support Up to 2 (user supplied)
PBX Only Panasonic PBX
Convenience Picture Recording Internal memory: Up to 50 visitors/sessions (up to 4 still images per visitor/session)
Night Vision Yes (LED lights)
Touch Panel / Pan & Tilt - / -
Voice Changer Yes (One-touch)
Intercom call Yes (between main monitor, wireless sub monitor and extension monitor)
Monitor Power source Power supply unit (VL-PS241) 24 V DC, 0.6 A
Power consumption Standby: 2.2 W , Operating: 14.0 W Measurement conditions: Main Monitor (1 pc.) with Door Station VL-V524 (1 pc.) is connected to VL-PS241, and wireless monitor VL-WD619 (1 pc.) is linked to the main monitor.
Dimensions (H x W x D) Approx. 158 x 201 x 25 mm
Mass (weight) Main monitor: 605 g
Power supply unit: 215 g (VL-PS241)
Operating environment Ambient temperature: Approx. 0C to +40C Relative humidity (non-condensing): up to 90 %
Display size 7-inch wide colour / WVGA (800 x 480 pixels) (Touch sensor keys)
Display language English, Arabic
Talking method Hands-free
Frequency range 1.88 GHz to 1.90 GHz
Installation method Wall mount (mounting bracket supplied)
External material Flame retardant ABS resin
Door Station Power source Power supplied by the main monitor
Dimensions (H x W x D) Approx. 152 x 102 x 35.5 (21.5 *) mm *Excluding sections embedded into the wall.
Mass (weight) Approx. 225 g
Operating environment Ambient temperature: Approx. -15C to +55C, Relative humidity (non-condensing): up to 90 %
Talking method Hands-free
Viewing angle Horizontally: Approx. 85, Vertically: Approx. 54
Image sensor/ Camera (pixel) 1/3 inch CMOS sensor (Approx. 1.3 M pixels)
Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens)
Lighting method LED lights
IP rating (INGRESS PROTECTION) IP44
*Water resistance is only assured if the door station is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
Installation method Surface mount (mounting base supplied), Flush mount (mount box sold separately)
External material Flame retardant ABS resin
Wireless Monitor Power source Main body: Rechargeable battery AAA (R03)
Ni-MH battery (1.2 V, 550 mAh)x2
Dimensions (H x W x D) Approx. 173 x 52 x 30 mm (excluding protruding sections)
Mass (weight) Approx.160 g (including the batteries)
Operating environment Ambient temperature: Approx. 0Cto +40C, Relative humidity (non-condensing): up to 90 %
Display size 2.2-inch colour / QVGA (320 x 240 pixels)
Frequency range 1.88 GHz to 1.90 GHz
RF transmission power Approx. 10 mW (average power per channel)
250 mW (max.)
Operating time Standby use: approx. 80 hours*When used fully charged in an operating temperature of 20C.
Charging time Approx. 8 hours*When the operating temperature is 20C. The charging time may increase when the operating temperature is lower than this.
Transmitting range Approx. 100 m (line-of-sight distance between the main and wireless monitor)
External material ABS resin
Charger Power source AC adaptor (5.5 V DC, 0.5 A)
Power consumption Standby: 0.6 W * , Charing: 1.6 W*When the sub monitor with full-charged batteries is placed on the charger.
Dimensions (H x W x D) Approx. 43 x 81 x 76 mm (excluding protruding sections)
Mass (weight) Approx. 70 g (excluding the AC adaptor)
Operating environment Ambient temperature: Approx. 0Cto +40C Relative humidity (non-condensing): up to 90 %
External material ABS resin
alliance wholesale prduct range

Newsletter

Sign up to receive the latest information